Electrician To The RescueSelby

Consumer unit upgrades

Consumer Unit Upgrade Electrician in Selby

An old fuse box, or a board where one fault knocks off half the house? A new consumer unit gives every circuit its own protection, and most swaps take a day.

Older split-load boards group circuits together, so one faulty appliance can kill every socket on one side. RCBOs protect each circuit separately, so only the faulty one goes off.

We test every circuit before the swap, as a new board often exposes faults the old one never picked up. Afterwards every way is labelled and you get the certificates.

Your board needs upgrading if

  • It still has rewireable fuses
  • There is no RCD, or one for everything
  • It has a plastic casing
  • It buzzes, smells hot or has scorch marks
  • The circuits are not labelled
  • You are adding a charger, solar or an extension

How a board swap works

  1. Test

    Existing circuits and earthing checked.

  2. Swap

    New metal board fitted and labelled.

  3. Certify

    Certified and notified under Part P.

Fuse boards in Selby

Selby has everything from Victorian terraces near the Market Place to 1970s estates and new builds out towards Staynor Hall. The older homes often still have an early board, and adding a charger or solar is a common reason to upgrade.

Consumer unit questions

How long does it take?

Usually a day.

Does it need to be metal?

Yes, that has been required in homes since 2016.

What certificates will I get?

An installation certificate and a Building Regulations certificate.

Time for a new consumer unit?

Send us a photo of your board.

Call 01757 842013